Changing The Passwords - Cisco Catalyst 6500 Series Configuration Manual

Configuring Basic Settings
This chapter tells how to configure basic settings on your Firewall Services Module (FWSM). This
chapter includes the following sections:
•
•
•
•
•
•

Changing the Passwords

This section tells how to change the login password and enable password from their default settings, as
well as how to change the maintenance partition passwords. The maintenance partition is used for
troubleshooting, recovering from a corrupted image, or recovering lost passwords. See the following
topics:
•
•
•
In multiple context mode, every context and the system execution space has its own login policies and
Note
passwords.
OL-6392-01
Changing the Passwords, page 6-1
Setting the Host Name, page 6-4
Setting the Domain Name, page 6-5
Adding a Login Banner, page 6-5
Configuring Interfaces, page 6-6
Configuring Connection Limits for Non-NAT Configurations, page 6-10
Changing the Login Password, page 6-2
Changing the Enable Password, page 6-2
Changing the Maintenance Partition Passwords, page 6-2
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide
C H A P T E R
6
6-1