Viewing Resource Allocation - Cisco Catalyst 6500 Series Configuration Manual

Monitoring Security Contexts

Viewing Resource Allocation

From the system execution space, you can view the allocation for each resource across all classes and
class members.
From the system execution space, view the resource allocation by entering the following command:
FWSM# show resource allocation [detail]
This command shows the resource allocation, but does not show the actual resources being used. See the
"Viewing Resource Usage" section on page 5-28
The detail argument shows additional information. See the sample displays below for more information.
The following sample display shows the total allocation of each resource as an absolute value and as a
percentage of the available system resources:
FWSM# show resource allocation
Resource
Conns [rate]
Fixups [rate]
Syslogs [rate]
Conns
Hosts
IPsec
SSH
Telnet
Xlates
All
Table 5-3
Table 5-3
Field
Resource
Total
% of Avail
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide
5-26
Total
35000
35000
10500
305000
78842
35
35
91749
unlimited
shows each field description.
show resource allocation Fields
Description
The name of the resource that you can limit.
See the "Configuring a Class" section on page 5-14
each resource name.
The total amount of the resource that is allocated across all contexts. The amount
is an absolute number of concurrent instances or instances per second. If you
specified a percentage in the class definition, the FWSM converts the percentage to
an absolute number for this display.
The percentage of the total system resources that is allocated across all contexts.
for more information about actual resource usage.
% of Avail
35.00%
35.00%
35.00%
30.50%
30.07%
7 35.00%
35.00%
35.00%
34.99%
Chapter 5 Managing Security Contexts
for more information about
OL-6392-01