Yamaha htr-5590 Owner's Manual page 28

SPEAKER MODE SETTINGS
This unit has 6 SPEAKER SET items on the SET MENU that you must set according to the nUlnber of speakers in your
configuration and their size. The following table sUlnlnarizes these SPEAKER SET items, and shows the initial settings
as well as other possible settings.
If the initial settings shown in the following table are not appropriate for your speaker configuration, change settings
following the steps described in "1 SPEAKER SET" fronl pages 56 to 59.
Item
Description Control value (default
setting indicated in bold)
1A CENTER SP Selects the output mode according to whether or not a center speaker is lRG/SML/NONE
being used and its perforn1ance.
18 MAIN SP
Selects the output n10de according to the performance of the main LARGE/Sl\1ALL
speakers.
1C REAR UR SP
Selects the output mode according to whether or not rear L/R speakers lRG/SML/NONE
are being used and their peti'orn1ance.
10 REAR CT SP Selects the Rear Center channel output according to the size of the Rear lRG/SML/N()NE
Center speaker.
1 E LFEl8ASS OUT
Selects the speaker according to use for LFE signal output and lo\v bass SWFR/rv1AIN/80TH
signal.
1 F MAIN LEVEL Selects the nlain speaker level. Normai/-IO dB
1G SP 8 SET Select the location of the n1ain speakers to be connected to the MAIN/ZONEB
SPEAKERS B terminals.
24
SPEAKER MODE SETTINGS
This unit has 6 SPEAKER SET items on the SET MENU that you must set according to the nUlnber of speakers in your
configuration and their size. The following table sUlnlnarizes these SPEAKER SET items, and shows the initial settings
as well as other possible settings.
If the initial settings shown in the following table are not appropriate for your speaker configuration, change settings
following the steps described in "1 SPEAKER SET" fronl pages 56 to 59.
Item
Description Control value (default
setting indicated in bold)
1A CENTER SP Selects the output mode according to whether or not a center speaker is lRG/SML/NONE
being used and its perforn1ance.
18 MAIN SP
Selects the output n10de according to the performance of the main LARGE/Sl\1ALL
speakers.
1C REAR UR SP
Selects the output mode according to whether or not rear L/R speakers lRG/SML/NONE
are being used and their peti'orn1ance.
10 REAR CT SP Selects the Rear Center channel output according to the size of the Rear lRG/SML/N()NE
Center speaker.
1 E LFEl8ASS OUT
Selects the speaker according to use for LFE signal output and lo\v bass SWFR/rv1AIN/80TH
signal.
1 F MAIN LEVEL Selects the nlain speaker level. Normai/-IO dB
1G SP 8 SET Select the location of the n1ain speakers to be connected to the MAIN/ZONEB
SPEAKERS B terminals.
24