Table of Contents
Advertisement
4. Adjustments
4-11. [F11] : Video Adjustment
<Setup for Video Adjustment>
(1) Set up the PCI-2746C board in the computer as explained in the instructions for the video adjustment jig.
(2) If the waveform of the brightness signal (Y) or color signal (C) does not appear in the "WAVE No. 0" window during
adjustments, check the connections of the video adjustment jig.
<Step 1>
Select [F11] Video Adjustment on the [Adjustment Items Select] screen.
—> The [Video Adjustment Preparation] screen appears.
<Step 2>
Run the adjustment in accordance with the instructions on the screen.
VIDEO Adjustment
< VIDEO Adjustment Preparations >
(1) Connect the camera and video adj. jig with the video cable.
(2) Confirm Video jig is connected with the video cable.
When preparations are complete,
press the [Enter] key.
—> Write the adjustment data to the Flash ROM when adjustment has been completed correctly.
—> The [VIDEO Adjustment Complete] screen appears.
60
USB cable
Video cable
AC-5VX
FinePix S3Pro Service Manual
PC for adjustments and checks
AC 100~240V
PCI-2746C
Board
Video adjustment jig
<Fig. 4-11-1>
Hide quick links:
Advertisement
Table of Contents
