Activating Functions For Another Telephone; Using System Functions From The Outside (Disa: Direct Inward System Access) - Siemens HiPath 2000 Operating Instructions Manual

Using Other Functions/Services
Step by Step
46
Activating Functions for Another
Telephone
If this function has been configured (contact the service
personnel), you can turn the following functions on and
off for other telephones. This feature is also known as
associated service.
• Do not disturb, code:
• Call forwarding, code
• Lock and unlock all phones,
code:
• Group ringing, code:
• Group call,
code:
• Reset services and functions,
code #0 ! Page 45
• Control relay,
code:
• Night service, code
• Timed reminders,
code
n
Lift the handset.
qlg
Enter the code.
o
Enter the internal number of the telephone for which
you want to activate the function.
o w
Enter the code – e.g.
(if relevant).
Using System Functions from the
Outside
(DISA: Direct Inward System Access)
If this function has been configured (contact the service
personnel), you can set up external outgoing calls from
outside the system, just like an internal user. You can
also activate and deactivate the following functions in
your system:
• Reset services and functions,
code: #0 ! Page 45
• Call forwarding, code:
97/#97 ! Page 38
*
11,
*
66/#66 ! Page 40
*
81/#81 ! Page 53
*
85/#85 ! Page 52
*
90/#90 ! Page 50
*
44/#44 ! Page 35
*
65 ! Page 36
*
97 for DND on – and procedure
*
1/#1 ! Page 16
*
12, 13/#1 ! Page 16
* *