Redialing A Number; Turning The Microphone On And Off; Calling A Second Party (Consultation Hold) - Siemens HiPath 2000 Operating Instructions Manual

Making Calls – Basic Functions
Step by Step
Redial
Mute
Mute
Consultation
Consultation
Consultation
14

Redialing a Number

The last three external telephone numbers dialed are
stored automatically.
You can redial them simply by pressing a key.
n
Lift the handset.
Press this key.
If this feature is configured (contact the service
personnel), accounts codes entered are also
saved ! Page 37.

Turning the Microphone On and Off

To prevent the other party from listening in while you
consult with someone in your office, you can temporari-
ly switch off the handset microphone or the handsfree
microphone.
Precondition: You are conducting a call. The
microphone is switched on.
Press the key. The LED lights up.
Turning off the mute:
Press the illuminated key. The LED goes out.
Calling a Second Party
(Consultation Hold)
You can call a second party while engaged in a call. The
first party is placed on hold.
Press the key. LED flashes.
o
Call the second station.
Return to the first party:
Press this key and wait two seconds.
or (depending on the configuration)
Press the key twice.