Making Calls - Basic Functions; Making And Answering Calls; Answering A Call - Siemens HiPath 2000 Operating Instructions Manual

Step by Step
Making Calls – Basic Functions

Making and Answering Calls

Special default ring signaling is set for your telephone:
• When you receive an internal call, your telephone
rings once every four seconds (single-tone se-
quence).
• When you receive an external call, your telephone
rings twice in rapid succession every four seconds
(dual-tone sequence).
• When you receive a call from the entrance tele-
phone, your telephone rings three times in rapid
succession every four seconds (triple-tone se-
quence).
• If a call is waiting, you hear a short tone (beep) every
six seconds.
Your service personnel can adjust the ring ca-
dence for external and internal calls for you. In
other words, different ring cadences can be set
for different internal callers.

Answering a Call

The telephone rings.
n
Lift the handset.
u v
or To raise or lower the volume, keep pressing the keys un-
til the desired volume is set.
Making Calls – Basic Functions
11