Table of Contents
Advertisement
2.4.2
wall mount to tabletop Installation
To change the telephone base from the wall mount position to tabletop position,
follow the steps below.
.
If the telephone line cord and power adapter cord are bundled, untie them first.
.
Slide the wall mount bracket up and remove it from the wall plate. Unplug the
telephone line cord (or DSL filter) from the wall. Unplug the power adapter from
the power outlet.
3.
Slide the telephone base up and remove it from the wall mount bracket.
4.
See section connect the Base Station.
8
Advertisement
Table of Contents
