VTech LS1250-B User Manual page 13

Test at the front door to determine when the infrared LEDs turn on. When they are
in operation, they turn red.
To adjust the shooting area, you may either relocate the doorbell in different
height level, or adjust the camera angle (see below).
to adjust the camera angle:
• Tilt the lever to adjust the angle of the camera lens. The camera lens can be
adjusted to left, right or down, up to 10 degrees.
The diagrams below demonstrate an example of doorbell camera position to view
a visitor about 0 inches from the camera. The camera in this example is set in
default angle (0 degree).
You may move the lever at the back of the doorbell to adjust the shooting area
(the camera lens).
Angle
Adjustment
View View
Right Left
CAUTION
Angle
Adjustment
View
Right
CAUTION

View
Left