Table of Contents
Advertisement
08001000001
If You Have Any of These Problems
08001020001
Mode
08001080001
#@multitude
During Installation
08001080086
08001080003
During Transmission
08001080003
Transmission Copy
Transmission Copy
Quality
08001080004
During Reception
D ring Reception
08001080006
Symptom
Battery is completely discharged. This may happen at first
The display is blinking
installation. Replace the battery and re-set the clock.
1. Check that your document is free of staples and paper
Document doesn't
clips, and that it is not greasy or torn.
feed/multiple feed
2. Check that your document is the right type to send
through a fax machine by consulting the list on
"Documents You Cannot Send". If your document has the
characteristics listed, make a photocopy of your document
and send the copy instead.
3. Check that the document is loaded properly.
4. Adjust the ADF Pressure.
The information code 031 will appear on the display if the
Document jam
document becomes jammed.
1. Check if Stamp LED is lit.
Does not stamp
2. Check Fax parameter No. 04 and No. 28 settings.
Replace stamp.
Stamp too light
Check own copy quality. If copy is OK, your machine has no
Vertical lines on the
problem, report to the receiving party that they have a problem.
transmitted document
If copy is NG, clean the Document Scanning Area.
1. Make sure the document is set face down.
Transmitted document
is blank
2. Check own copy quality. If copy is OK, your machine has no
problem, report to the receiving party that they have a
problem. If copy is NG, clean the Document Scanning Area.
The information code 010 will appear on the display if the paper
No recording paper
runs out.
The information code 001, 002 or 016 will appear on the display
Recording paper jam
if the paper gets jammed.
Make sure that there is paper in the Paper Tray. Follow
Recording paper
instructions for loading paper.
doesn't advance into
machine
Check to see if the recording paper is jammed inside of the
Recording paper
machine.
doesn't eject after
printing
Check Print Reduction settings.
Document auto
reduction doesn't work
The information code 015 will appear on the display if the Print
Out of ink
Cartridge runs out of ink.
Troubleshooting
Action
Page
24
124
39
40
122
118
42
35, 37
125
121
121
18
117
18
117
65
123
111
Advertisement
Table of Contents
