Panasonic PANAFAX UF-333 User Manual page 108

Journals and Lists
07001000002
Explanation of Contents
(1) Printout date
(2) Printout time
(3) Journal number
(4) Communication result
(5) Number of pages transmitted or
received
(6) File number
(7) Duration of communication
(8) Type of communication
(9) Remote station identification
(10) Communication date
(11) Communication Start time
(12) Diagnostic
(13) Own LOGO
(14) Own ID number
(15) Own Character ID
(16) Type of communication
(17) Destination
(18) Received remote station's ID
(19) Resolution
07001110039
104
: 01-32 (Does not always begin with 01 when printed out manually)
: "OK" indicates that the communication was successful.
"BUSY" indicates that the communication has failed because of busy line.
"STOP" indicates that STOP was pressed during communication.
"M-OK" indicates that the substitute reception message in memory was not
printed out.
"P-OK" indicates that memory overflow or document misfeeding occurred while
storing the documents into memory for transmission but successfully stored
document(s) was sent.
"R-OK" indicates that the Confidential Communication was successful.
"3-digit Info Code" (see page 114) indicates that the communication has failed.
: The 3-digit number is the number of pages successfully transmitted or
received.
When the documents are stored into memory, two 3-digit numbers will appear.
The first 3-digit number represents the number of pages successfully
transmitted. The second 3-digit number represents the total number of pages
that were attempted to be transmitted.
: 001 to 255 (If the communication is stored into memory, a file number is
assigned for each communication.)
: "XMT" means Transmission
"RCV" means Reception
"POL" means Polling
: Name : Recorded name in One-Touch or ABBR. Numbers or remote station's
Character ID.
number : Dialed telephone number
Number : Remote station's ID number.
: For service personnel only
: Up to 25 characters
: Up to 20 digits
: Up to 16 characters
: Transmission or memory transmission
: If a One-Touch or ABBR was used for the transmission:
One-Touch or ABBR. No./Telephone Number/Recorded Name
If not : Telephone number
: Character ID/ID number
: "STD" means standard resolution
"FINE" means fine resolution
"S-FINE" means super fine resolution
(PIN code will not be shown)