Connecting A Tv And Playback Devices; Input/Output Jacks And Cables; Audio Jacks - Yamaha RX-A3060 Owner's Manual

2

Connecting a TV and playback devices

Connect a TV and playback devices (video and audio devices) to the unit.
For information on how to connect a USB storage device, see "Connecting a USB storage device" (p.90).

Input/output jacks and cables

The unit is equipped with the following input/output jacks. Prepare the cables that match the jacks on your devices.
⬛
Video/audio jacks
To input/output video and audio signals, use the following
jacks.
HDMI jacks
Transmit digital video and digital sound through a single
jack. Use an HDMI cable.
HDMI cable
Y
Use a 19-pin HDMI cable with the HDMI logo. We recommend using a
cable less than 5.0 m (16.4 ft) long to prevent signal quality degradation.
X
• The unit's HDMI jacks support the HDMI Control, Audio Return Channel
(ARC), and 3D and 4K Ultra HD video transmission features.
• Use high speed HDMI cables to enjoy 3D or 4K Ultra HD videos.
⬛
Video jacks
To input/output only video signals, use the following jacks.
COMPONENT VIDEO jacks
Transmit video signals separated into three components:
luminance (Y), chrominance blue (Pb), and chrominance red
(Pr). Use a component video cable with three plugs.
Component video cable
VIDEO jacks
Transmit analog video signals. Use a video pin cable.
Video pin cable
41
En
⬛

Audio jacks

To input/output only audio signals, use the following jacks.
OPTICAL jacks
Transmit digital audio signals. Use a digital optical cable.
Remove the tip protector (if available) before using the cable.
Digital optical cable
COAXIAL jacks
Transmit digital audio signals. Use a digital coaxial cable.
Digital coaxial cable
AUDIO jacks
Transmit analog stereo audio signals. Use a stereo pin cable
(RCA cable).
Stereo pin cable