TOOL Button and TOOL App Settings
Use the procedure below to specify which tools are called up and their call
up sequence when the TOOL button is pressed. You can also configure
settings that control watch functions.
1. Y On your Android smartphone, start up CASIO MOMENT
SETTER+ app and then tap "Buttons".
2. Y Tap "TOOL Button" to display a list of TOOL app
functions that can be assigned.
For information about TOOL app functions, see
●
(TOOL
Button)".
3. Y Select the check boxes (
functions you want to assign to the TOOL button.
Each time you tap a check box, it toggles between being selected
●
(
) and cleared (B).
If you try to enable "My Graph" (
●
records" setting (see
appear asking if you want to enable "Save daily activity records". To
enable "Save daily activity records" and use My Graph, tap [I agree]. If
you do not want to use My Graph, tap [Cancel].
4. Y Drag TOOL app functions around the list to create the
recall sequence you want.
Later, each press of the TOOL button, will recall assigned TOOL app
●
functions in the sequence shown here, starting from the top of the list
and progressing down to the bottom.
5. Y If you want to change the settings of a TOOL app, tap
D to the right of the applicable function name to display
a setting screen.
The table below explains TOOL app functions you can change.
●
) next to all of the TOOL app
"Registration
Details") is disabled, a message will
EN-95
"Using the TOOL App
) while the "Save daily activity