Casio WSD-F20 User Manual
  1. Manuals
  2. Brands
  3. Casio Manuals
  4. Watch
  5. PRO TREK SMART WSD-F20
  6. User manual

Casio WSD-F20 User Manual

Hide thumbs Also See for WSD-F20:
Table of Contents

Advertisement

Quick Links

EN
.
WSD-F10
WSD-F20
WSD-F20S
User's Guide
Thank you for purchasing this watch.
Before trying to use this watch, be sure to read the Safety Precautions in
the Quick Start Guide that comes with it. Make sure you use the watch
correctly.
© 2017 CASIO COMPUTER CO., LTD.

Advertisement

Table of Contents
loading

Related Manuals for Casio WSD-F20

Summary of Contents for Casio WSD-F20

  • Page 1 Thank you for purchasing this watch. Before trying to use this watch, be sure to read the Safety Precautions in the Quick Start Guide that comes with it. Make sure you use the watch correctly. © 2017 CASIO COMPUTER CO., LTD.

  • Page 2: Table Of Contents

    About This Manual ............... EN-7 Getting Ready ................... EN-8 Basic Operations You Should Remember ........EN-13 Using Outdoor Watch Functions - Using CASIO Watch Faces and Apps ......................EN-18 Using CASIO Watch Faces ............EN-19 Using the Location Memory App (WSD-F20/WSD-F20S only) ... EN-21 Using the TOOL App ..............

  • Page 3: Introduction

    Some watch functions are restricted when it is paired with an iPhone. For ● details, visit the website below. http://support.casio.com/wsd/ Watch Features Android Wear 2.0 Built In This watch is designed to be paired with a smartphone running Android or higher or iOS 9 or higher.
  • Page 4 *2 To display the map when you do not have a smartphone, you need to have the map data downloaded beforehand. Dual-layer LCD for Improved Readability CASIO app operations are designed to use either the color or the monochrome LCD. The monochrome LCD makes display contents easier to read when outdoors under sunlight.

  • Page 5: Measurement Functions

    Play ™ store for Android smartphones only) can be used to customize the watch setup (MOMENT SETTER notifications, TOOL app functions, etc.) from your smartphone. CASIO Camera Linking Use this app to control supported CASIO camera models from the watch. For details, visit the CASIO website below. http://support.casio.com/wsd/ Measurement Functions Your watch can take barometric pressure, altitude, bearing, and other readings.
  • Page 6 Altimeter, Barometer The watch’s Altimeter uses a pressure sensor to measure barometric pressure, and then calculates and displays relative altitude based on the measured value. Because of this, readings taken at different times at the same location may produce different altitude values due to changes in temperature, humidity, barometric pressure, and other factors.

  • Page 7: Overview

    Overview Package Contents Watch, AC adaptor, charger cable, Quick Start Guide, warranty General Guide ① ② ⑤ ③ ⑥ ⑦ ④ ⑧ A Charge LED E TOOL button B Charger terminal F Power button C Pressure sensor G APP button D Microphone H Touch screen EN-6...

  • Page 8: About This Manual

    CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost ● profits due to loss of data caused by malfunction or maintenance of this product, or any other reason.

  • Page 9: Getting Ready

    Getting Ready Be sure to read the precautions in the “Quick Start Guide”, and also perform all of the steps under “Preparing the Watch for First Use” and “Preparing the Watch for Outdoor Use”. Preparing the Watch for First Use You must perform the steps below before using the watch for the first time.
  • Page 10 In order to use all of the functionality provided by this watch, be sure to ● update all of your related CASIO apps to their latest versions before using your watch. For information about the update procedure, visit the website below.
  • Page 11 Apps for which updates are available will be shown under ● “Updates”. 4. If there is an update available for CASIO MOMENT SETTER+, be sure to update it. Updating any other apps that are available is also recommended. 3. Configure the location settings of the watch and smartphone.
  • Page 12 GPS, Wi-Fi, and mobile network (data communication) settings. The settings in the steps below are required to enable the following functions: CASIO watch faces, the Location Memory app, the TOOL app, the Activity app, and all functions of the MOMENT SETTER app.
  • Page 13 3. Tap “I agree.”. This changes the “Save daily activity records” setting to “ON”. ● 6. Turn on the “Save Daily Location Info” setting (WSD-F20/ WSD-F20S only). 1. While the watch face (Location or Traveler) is displayed, hold your finger on the touch screen for about two seconds to display the setting menu.

  • Page 14: Basic Operations You Should Remember

    Pressing while a watch face is displayed starts up a (Bottom right) previously specified app *1 Under WSD-F20 and WSD-F20S initial default settings, starts up Location Memory. Under WSD-F10 initial default settings, there is no app assigned to this button.
  • Page 15 Wake Up If you don’t tap the touch screen for a few seconds, the watch screen will dim. To wake up the watch and restore it to normal brightness, tap the touch screen or press the power button. Power Supply Operations To do this: Perform this operation: Charge the...
  • Page 16 Note For details about watch face operations, visit the website below. ● https://support.google.com/androidwear/ For information about CASIO watch faces, see “Using CASIO Watch ● Faces”. EN-15...
  • Page 17 Using a Specific App For information about the TOOL, Activity, MOMENT SETTER, Location ● Memory (WSD-F20/WSD-F20S only), and Timepiece apps, see “Using Outdoor Watch Functions - Using CASIO Watch Faces and Apps”. For details about EXILIM Controller, visit the website below. ● http://support.casio.com/wsd/...
  • Page 18 Though you can use a wide range of functions without connecting to a smartphone, some apps and services (dictation, smartphone related apps, etc.) are not available unless there is a connection between the watch and a smartphone. For details, visit the websites below. https://support.google.com/androidwear/ http://support.casio.com/wsd/ EN-17...
  • Page 19 Using Outdoor Watch Functions - Using CASIO Watch Faces and Apps This section explains how to interpret the contents of CASIO watch faces and how to use CASIO apps and make your outdoor adventures more interesting and enjoyable. Use this app:...

  • Page 20: Using Casio Watch Faces

    Using CASIO Watch Faces Your watch comes with the CASIO Watch Faces described below built in. Watch face names are used in the list of favorite watch faces and the list of all watch faces (see “Watch Face Operations”). Analog watch face that shows your current latitude and Location longitude based on the watch’s GPS, along with a...
  • Page 21 “Correct Altitude Using Location ” Compass “Compass Calibration”, “Compass Magnetic Declination Calibration” *1 This setting is not available while there is a connection between the WSD- F10 and your iPhone. Changing CASIO Watch Face Settings “Common Outdoor Function Settings”. EN-20...

  • Page 22: Using The Location Memory App (Wsd-F20/Wsd-F20S Only)

    Using the Location Memory App (WSD-F20/WSD- F20S only) The Location Memory app makes it quick and easy to record map-related information. You can use the Location Memory app to perform the operations described below. Display a map to check your current location.
  • Page 23 In order to be able to receive notifications triggered by “Revisit” marks, your ● Android phone must have the CASIO MOMENT SETTER+ app installed, and there must be a connection between the phone and watch. Note that notification receipt triggered by “Revisit” marks is not supported ●...
  • Page 24 Other Operations To view a recorded memo, swipe the displayed map from bottom to top. On ● the menu that appears, tap “History”. For information about how to track your route on a map, see “Enabling Route ● Tracking on the Map (Route Display)”.
  • Page 25 To display your route, use the procedure below to change “Route Display” on the setting menu from “OFF” (initial default setting) to “ON”. 1. While the map is displayed, swipe the touch screen from bottom to top. On the menu that appears, tap “Settings”. 2.
  • Page 26 Changing the “Revisit” Mark Notification Setting Use “Revisit” marks to record a mark and have the watch alert you whenever you are in the vicinity. Under the watch’s initial default settings, notification is performed when both of the conditions below are satisfied. You are <<within five kilometers>>...

  • Page 27: Using The Tool App

    Using the TOOL App The TOOL app displays a wide variety of information about the natural environment around the watch. TOOL Function List Compass Shows a compass needle on the face. Altimeter Two color screens are available. An Altimeter Screen (A) that shows a value and dial indication of the altitude at your current location, and an Altitude Graph Screen (B) that shows a graph of altitude changes over the...
  • Page 28 Basic TOOL Operations To do this: Perform this operation: Change the While the TOOL app is running, press the TOOL ● TOOL function button. While the TOOL app is running, swipe the touch ● screen from top to bottom, or from bottom to top. Switch between To switch from screen A to screen B, swipe the touch the two color...

  • Page 29: Using Compass

    Using Compass The pointer indicates true north. The value in the center of the display shows how many degrees there are in a clockwise direction from the north indication (which is 0°) to 12 o’clock on the watch. For example, if 12 o’clock on the watch is facing due east, the value will show 90°.
  • Page 30 Using Altimeter Altimeter has a color display Altimeter Screen (left), a color display Altitude Graph Screen (center), and a monochrome display (right). All of the screens show the altitude at your current location. ● The Altitude Graph Screen shows a graph of altitude changes over the past ●...
  • Page 31 Before Using Altimeter The watch’s Altimeter can be configured to use positioning information ● (GPS) to correct altitude readings automatically (not supported when the WSD-F10 is connected with an iPhone). Configure the settings below to use this function. Correctly configure the “Location” setting on the watch and smartphone. ー...
  • Page 32 Altimeter Precautions Do not use this watch while skydiving, hang gliding, paragliding, gyrocopter ● flying, glider flying, or engaged in other activities where altitude changes suddenly. Altitude readings produced by this watch are not intended for special- ● purpose or industrial level use. In an aircraft, the watch measures the in-cabin pressurized air pressure, so ●...
  • Page 33 Using Barometer Barometer has a color display Barometer Screen (left), a color display Barometric Pressure Graph Screen (center), and a monochrome display (right). All of the screens show the barometric pressure at your current location. ● The Barometric Pressure Graph Screen shows a graph of pressure ●...
  • Page 34 Using Sunrise/Sunset Sunrise/Sunset has a color display Time Screen (left), a color display Azimuth Screen (center), and a monochrome display (right). The Time Screen shows the following times: sunrise time (upper left), pre- ● dawn nautical twilight start time (lower left), sunset time (upper right), post- sunset nautical twilight end time (lower right), and the current time (bottom center).
  • Page 35 Using Tide Graph Tide Graph a color display Tide Graph Screen (left), a color display Fishing Time Screen (center), and a monochrome display (right). The Tide Graph Screen shows the current tide level and time (red ● characters in the center of the screen), along with the high tide (High) and the low tide (Low) that will occur up to 12 hours later.
  • Page 36 Using My Graph My Graph shows the status of your activities for the current day. Under initial default settings, both screens show how many calories you ● have burned from the start (00:00) of the current day. A color display shows what types of activities you have performed on the ●...
  • Page 37 To specify the type of values shown in the center of the My Graph screen 1. Swipe the touch screen from right to left. On the “Settings” Screen that appears, tap D. This displays the setting menu. 2. Scroll the setting menu upwards and downwards. When “Centered value / My Graph”...

  • Page 38: Using The Activity App

    Trekking Paddle Fishing Snow Cycling *1 WSD-F20/WSD-F20S only *2 Available with the WSD-F10 only while the watch is connected with an Android phone. Activity App Screen Screen Before Start of Measurement The text below the “START” (or “BEGIN”) button shows the activity type. You can change the activity type by swiping the touch screen left or right.
  • Page 39 Fishing in progress, display the fishing result screen measurement and then press the APP button or tap *3 WSD-F20 and WSD-F20S only *4 The Activity app automatically shuts down 20 hours after measurement starts. Important! Note that if the watch switches to the monochrome LCD screen while the ●...
  • Page 40 MOMENT SETTER Notification Function On the “START” Screen, you can tap to display a screen for configuring MOMENT SETTER settings that control how notifications of useful information are provided to you while engaging in an activity. For details, see “Using the MOMENT SETTER App”.

  • Page 41: Using The Moment Setter App

    Using the MOMENT SETTER App For example, you can use the MOMENT SETTER app to receive notifications like the ones shown below. During an Activity app Trekking measurement operation, perform a vibration ● notification and display the remaining altitude when there are 200 m remaining to an altitude of 2000 m.
  • Page 42 Setting menu. See “Common Outdoor Function Settings”. *1 The menu that appears when one of these items is tapped is the same menu that is displayed when MOMENT SETTER is accessed from the Activity app. *2 WSD-F20 and WSD-F20S only EN-41...
  • Page 43 Example MOMENT SETTER Operation This section shows an example operation for configuring notification settings for “Climbing, trekking”. This operation can be started from the MOMENT SETTER app or Activity app. 1. Start up the MOMENT SETTER app and scroll the main menu upwards and downwards.

  • Page 44: Using The Timepiece App

    5. At the bottom of the display, tap to toggle it to 6. Press the power button to exit the MOMENT SETTER app. After performing the above operation, you need to start up the Activity ● app and start a Trekking measurement operation to actually receive notifications.
  • Page 45 Timepiece Mode Operations To do this: Perform this operation: Switch the watch to 1. Start up the Timepiece app (see “Start up an Timepiece Mode app”). This displays a confirmation screen. ● 2. Read the explanation on the screen, swiping from right to left as required to change pages.

  • Page 46: Common Outdoor Function Settings

    Common Outdoor Function Settings CASIO apps and CASIO watch faces share the same outdoor functions such as Compass, Altimeter, etc. This section explains settings that are common to all CASIO apps and watch faces. Basic Operations for Configuring Common Settings Use the setting menu to configure common settings.
  • Page 47 TOOL app Location Memory app Activity app Timepiece app *1 WSD-F20/WSD-F20S only Compass Calibration (WF) Operation Tap this setting item and then move the watch around as instructed by the Compass magnetic calibration message and animation that appears on the display.
  • Page 48 Altitude Calibration (WF/TL/AC) Operation 1. If “Correct Altitude Using Location” is on, turn it off. 2. Tap “Altitude Calibration”. 3. On the altitude input screen that appears, input the elevation at your current location (which you obtained from local indications). Tap the digit of the value that you want to change, and then use ●...
  • Page 49 Correct Altitude Using Location (WF/TL/AC) Operation Each tap of this setting item toggles between “ON” and “OFF”. Description Select “ON” for this setting to perform auto altitude calibration based on the watch’s or your smartphone’s location information (GPS). “OFF” must be selected for this setting to perform altitude calibration manually using “Altitude Calibration”.
  • Page 50 Description Though the pressure sensor built into the watch is adjusted at the factory and normally does not require calibration, you can perform the calibration operation above if you notice that readings are very different from those from other sources. To calibrate manually, use this item to input the current barometric pressure as measured by another accurate barometer.
  • Page 51 Operation 1. Move to an outdoor area where the sky is visible. 2. Perform the required operation on a CASIO watch face to display the setting menu, and then tap “GPS Time Calibration”. 3. Carefully read the message that appears on the display and then tap “Correct”.
  • Page 52 Port setting (TL) Operation Tap this setting item and then scroll the list that appears upwards and downwards. When the name of the point (port name or name of a city near the ocean) you want is displayed, tap it. Description This setting specifies the point (port) whose tide information is displayed by the “Tide Graph”...
  • Page 53 Save Daily Location Info (WSD-F20/WSD-F20S only) (WF/MS/LM) Operation After tapping this setting, you then need to select “Every 6 minutes”, “Every 1 minute”, or “OFF”. Important! When you tap this setting item to toggle from “OFF” to “ON”, you will also ●...
  • Page 54 Save daily activity records (WF/TL/MS) Operation Each tap of this setting item toggles between “ON” and “OFF” (initial default setting). Important! When you tap this setting item to toggle from “OFF” to “ON”, you will also ● need to tap “I agree.” on the confirmation dialog box that appears. Description This item is for configuring a setting related to watch faces (Authentic, Field, Multi), the TOOL app (My Graph), and the MOMENT SETTER app.
  • Page 55 Wrist where you wear the watch (TL/MS) Operation Each tap of this setting item toggles between “Right” and “Left”. Description The value you input for this item is used as basic information when calculating data displayed on the TOOL app’s “My Graph”. Target altitude (AC) Operation Tap this setting item and then use the screen that appears to specify a target...
  • Page 56 Auto Record (WSD-F20/WSD-F20S only) (AC) Operation 1. Use the Activity app to display the Snow “BEGIN” screen, and then tap “BEGIN”. 2. Swipe the touch screen from right to left as many times as necessary to display the “Settings” Screen. Next, tap D.
  • Page 57 Description This item is for selecting the map skin displayed by the Activity app and the Location Memory app. You can select geographic view, satellite view, or another view to suit your location or purpose. Download Map (AC/MS/LM) Operation 1. Change the “Map Type” setting to “Mapbox”. 2.
  • Page 58 Note that with Activity app Cycling, Paddle , and Snow measurement ● operations, GPS positioning is executed at relatively short intervals even when “Battery Priority” is selected for this setting. Because of this, battery power savings are less in this case. *1 WSD-F20/WSD-F20S only EN-57...
  • Page 59 Note that once you perform this operation, there is no single batch operation to re-enable notifications. You will need to use the MOMENT SETTER app menu to individually re-enable each notification you want. Route Display (WSD-F20/WSD-F20S only) (LM) For information about this item, see “Enabling Route Tracking on the Map (Route Display)”.

  • Page 60: Monochrome Display

    Monochrome Display Your watch has a dual-layer color and monochrome LCD. This section summarizes when the monochrome display is displayed. Watch Monochrome Displays Your watch has the two types of monochrome display screens shown below. (Lined) (Unlined) The watch displays the monochrome display in the cases below. After entering Timepiece Mode The lined screen shown in ①...
  • Page 61 While the “ 2 Layers ” watch face is selected If you do not perform any operation on the watch, the unlined screen shown in ② will be displayed. Tapping the touch screen will switch to the color display. While “Always-on screen” is OFF If you do not perform any operation on the watch, the unlined screen shown in ②...

  • Page 62: Troubleshooting

    If this message/error code keeps appearing, it request servicing. could mean that the chargeable battery has deteriorated. Request servicing by your original retailer or authorized CASIO service center. 1003 Charge the watch in an area where the ambient Too cold to charge.
  • Page 63 Power about 12 seconds until the display goes white. will turn off shortly. 9001, 9002, 9003 Take your watch to an authorized CASIO Some problem occurred service center or to your original retailer for with the watch. Power inspection and repair.

  • Page 64: Important

    Important! Note the precautions in this section whenever using this watch. Precautions During Use Display Information Accuracy Tide Graph Precautions For Japan area oceans, tide times and level changes are predictively calculated using harmonic constant data obtained from Bibliography 742 Tidal Harmonic Constants Tables, Japanese Coast (February 1992) published by the Hydrographic Department of the Japan Coast Guard, and from the List of Tidal Stations (2015) published by the Japan Meteorological...

  • Page 65: Water Resistance

    To maintain water resistance, have the gaskets of your watch replaced ● periodically (about once every two or three years). Be sure to leave battery replacement up to an authorized CASIO service ● center or your original retailer. Unauthorized battery replacement may cause problems with the waterproof performance of the watch.
  • Page 66 CASIO service center or to your original retailer. Do not charge the watch if the watch or charger cable is wet. Wipe off all ●...
  • Page 67 Using GPS Outside Your Country Some countries or geographic areas put legal restrictions on the use of GPS, on the collection and logging of location information, etc. Your watch has built- in GPS functionality, so before embarking on international travel to a country or area outside of the country where you purchased your watch, you should check with the embassy of the countries you plan to visit, your travel agency, or some other reliable source of information to find out if there are any...
  • Page 68 Location measurements are performed using satellites that are operated ● and managed by the United States (GPS), Russia (GLONASS), and Japan (QZSS). Because of this, there is always the possibility that access to its information may be disabled at the discretion of these countries. Wi-Fi connectivity Note that when using a Wi-Fi connection you need to be aware of the watch’s battery level and your surrounding environment.
  • Page 69 Thermal Shock Tested in accordance with Method 503.6 Procedure I-C. Freezing Tested in accordance with Method 521.4 Procedure I. Protective stickers Be sure to remove all protective stickers and/or paper tags that may be ● affixed to your watch (including its back cover) and/or its band when you purchase it.
  • Page 70 Take your watch to an authorized CASIO service center or to your original retailer for inspection and repair (for which you will be charged) or to have the band replaced (for which you will be charged).
  • Page 71 Chemicals Do not allow your watch to come into contact with thinner, gasoline, ● solvents, oils, or fats, or with any cleaners, adhesives, paints, medicines, or cosmetics that contain such ingredients. Doing so can cause discoloration of or damage to the resin case, resin band and other parts. Storage If you do not plan to use your watch for a long time, thoroughly wipe it free ●...
  • Page 72 Metal Components Failure to clean dirt from metal components can lead to formation of rust, ● even if components are stainless steel or plated. If metal components exposed to sweat or water, wipe thoroughly with a soft, absorbent cloth and then place the watch in a well-ventilated location to dry.

  • Page 73: User Maintenance

    ● pins to fly out of position or to fall out. If you ever notice any abnormality immediately stop using your watch and take it to an authorized CASIO service center or to your original retailer. Even if the surface of the metal appears clean, sweat and rust in crevasses ●...

  • Page 74: Chargeable Battery Handling (Please Recycle!)

    The built-in lithium-ion battery includes valuable resources. When you are ready to discard your watch, follow proper procedures in order to recycle resources. For information about the proper procedure to follow when discarding the watch, contact an authorized CASIO service center or your original retailer. Important! Do not try to replace batteries by yourself.

  • Page 75: Main Specifications

    Main Specifications Common Specifications 1.32-inch dual layer display, Color TFT LCD (320 × 300 pixels) + ● Monochrome LCD Capacitive touch panel ● Microphone ● Vibration ● Battery: ● Type: Lithium-ion battery Charging time: Approximately 2 hours at room temperature (Be sure to use the special charger cable and AC adaptor.) Bluetooth: Bluetooth 4.1 (Low Energy support)
  • Page 76 Watch: ● Auto time correction: By communication with smartphone (Time can be adjusted manually.) By GPS information (Can be corrected manually.) Time zones (world time function): Supports multiple world time zones (Types depend on system time zones.) 12/24-hour timekeeping Full auto-calendar: Auto switching by linking with smartphone Summer time: Auto switching by linking with smartphone...
  • Page 77 Tide and Fishing: Tide graph: Past 12 hours + Next 12 hours Fishing time (Calculated according to current location, and moon hour angle and age.) Sunrise/sunset: Sunrise/Sunset times (Current location sunrise/sunset) Sunrise/Sunset directions: Accuracy depends on compass My Graph Daily activity pattern: Stopped, walking, running, vehicle Calories burned, Steps, Altitude (Highest altitude achieved that day), Workout time Screen brightness setting: 5 levels...
  • Page 78 About MIL-STD-810G (United States military standard issued by the U.S. ● Department of Defense): Description: 1. Drop 2. Random Vibration 3. Humidity 4. Solar-Radiation 5. Non-Operating Altitude 6. Operating Altitude 7. Non-Operating High Temperature 8. Non-Operating Low Temperature 9. Temperature Shock 10.
  • Page 79 Model Specific Specifications WSD-F10 WSD-F20 WSD-F20S Sensors Pressure sensor, GPS, Pressure sensor, Accelerometer, Accelerometer, Gyrometer, Magnetic Gyrometer, sensor Magnetic sensor Operating time Normal use: More than one day Timepiece Mode: Approximately one month on full charge Operating 0℃ to 40℃ (32℉...
  • Page 80 *3 In order to be able to use these functions your Android phone must have the CASIO MOMENT SETTER+ app installed, and there must be a connection between the phone and watch. These functions are not supported in the case of iOS.

  • Page 81: Supplementary Information

    Supplementary Information Open Source Information CASIO uses GPL, LGPL and other source code that comes under an open source license in this product. CASIO discloses the source code in accordance with each open source license. For source codes and details about each open source license, visit the CASIO website.
  • Page 82 This device complies with part 15 of FCC Rules and Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 83 Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The WSD-F10/WSD-F20/WSD-F20S has been tested and found to comply with FCC/IC radiation exposure limits set forth...
  • Page 84 CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan S01_MA1704-A...

This manual is also suitable for:

Wsd-f10Wsd-f20s

Table of Contents