Configuring au Media Tuner
Initial Settings
Perform the following procedure before using au Media Tuner for the
first time.
While the standby screen
is displayed, hold down
g for at least one
second.
Escape clause is displayed.
If you select "OK (
(Do not display again.)), the display will
not appear in the future.
Use j to scroll the
screen to read its contents.
After you do, use j to
select "OK" and then press
c (
A screen for configuring au Media Tuner
initial settings will appear. Follow the
instructions on the screen to configure
the settings. After you finish the channel
setting screen will appear.
Use j to select "
and then press c (
(Select).
This automatically configures reception
area and channel settings, and displays
the television screen.
If you want to configure area settings
manually, select "
Manually).
) (Select).
" (Auto Setting)
)" (OK
)
" (Set
77