Common Casio App And Casio Watch Face Settings; Performing Compass Calibration (Magnetization Correction - Casio WSD-F10 User Manual

Common CASIO App and CASIO Watch Face
Settings
A number of functions, such as Compass and Altimeter are common for both
CASIO apps and CASIO watch faces. This section explains settings that are
reflected both in CASIO apps and CASIO watch faces.
Performing Compass Calibration (Magnetization
Correction)
You can start the magnetization correction operation manually while a CASIO
watch face that supports compass display is being used.
To start the magnetization correction operation
1. While the "Authentic", "Field", or "Multi" watch face is
displayed, hold your finger on the touch screen for about
two seconds until the watch face compresses in size.
2. Tap D. On the setting menu that appears, tap "Compass
Calibration".
3. While wearing the watch, move your arm so the watch
faces front, back, left, and right.
View the messages and animation that appear on the watch display to
●
get an idea of how you need to move the watch.
4. When the message "Calibration complete" appears,
swipe the touch screen from left to right.
Note
If "Compass Calibration" is dimmed (and will not respond when tapped) in
●
step 2 above, it means that the compass accuracy level is sufficient, and
that correction is not required. Swipe the touch screen from left to right to
exit the setting menu.
EN-82