Screen while Measurement is in Progress
Climbing, trekking
A Difference in altitude between the current reading and the reading 60
minutes before. If the current measurement was started less than 60
minutes ago, this value shows an approximate 60-minute value
calculated based on the current reading and the first reading.
B Current time.
C Input target altitude.
D Difference between target altitude and current altitude.
Rmng: Current altitude is less than target.
–: Current altitude is greater than target.
E Time elapsed from start of measurement.
Note
To correct the current altitude used for A and D above, use the altimeter
●
function included in the watch's TOOL app. For information about the
correction operation, refer to
manually".
The altitude difference A is based on barometric pressure measurements
●
that are calculated to altitude values. Barometric pressure values and their
calculated altitude values can be affected by weather conditions.
①
"To perform altitude reading calibration
EN-79
②
③
④
⑤