Error Code And Error Message List - Casio WSD-F10 User Manual

Error Code and Error Message List

If an error code or error message appears on your watch, look it up in the table
below and take the required action.
Error Code
Error Message
1001, 1002, 1009
Normal charging is not
possible for some
reason. If this message
keeps appearing,
request servicing.
1003
Too hot to charge.
1004
Too cold to charge.
9000
Some problem occurred
with the watch. Power
will turn off shortly.
9001, 9002, 9003
Some problem occurred
with the watch. Power
will turn off shortly.
9010
Watch temperature is
high. Power will turn off
to protect it.
Required Action
Remove the charger cable from the watch, turn
off the watch, and then try charging again. Use
only the AC adaptor and charger cable that
comes with the watch for charging.
If this message/error code keeps appearing, it
could mean that the chargeable battery has
deteriorated. Request servicing by your
original retailer or authorized CASIO service
center.
Charge the watch in an area where the ambient
temperature is between 10°C and 35°C (50°F
and 95°F).
To restart the watch, first charge it for at least
one hour. Next, hold down the power button for
about 12 seconds until the display goes white.
Take your watch to an authorized CASIO
service center or to your original retailer for
inspection and repair.
Remove the watch from your wrist and leave it
in a location that is not exposed to direct
sunlight, where the temperature is between
10°C and 30°C (50°F and 86°F) to allow the
watch to cool down. You will be able to turn the
watch on again after it reaches a lower
temperature.
EN-115