Table of Contents
Advertisement
14. Screw back the housing of the DVR.
15. To install two HDDs in the two Hot-swap HDD Trays, please see the steps below:
a. Insert a HDD in the tray and screw the HDD with the supplied 4 screws to the tray.
b. Push the Hot-swap HDD Tray into the drive bay of the DVR with the Locking Arm
unlatched.
c. Close the Locking Arm until you hear a click, and close the cover of the DVR.
Figure 2-25
Figure 2-26
Figure 2-27
17
PARAGON960 x4 32CH
Advertisement
Table of Contents
