Rear Panel - EverFocus Paragon960 User Manual

1.5 Rear Panel

1 2
3
6
No. Name
1 Power Port
2 Power Switch
3 eSATA Port
Matrix (Video
4
Output)
5 Video Input
6 RS-232 Port
7 RS-485 Port
Main Monitor
8
Port (HDMI)
Main Monitor
9
Port (VGA)
Call Monitor
10
Port (BNC)
11 LAN 1 / LAN 2
12 Alarm Input
Audio Output
13
(RCA)
14 Alarm Output
15 Audio Input
4
7 8 9
Figure 1-4
Description
Connects to the 100-240 VAC~ power using the supplied Power Cord.
Press to switch on or off the DVR. Please see 2.4 Turn On / Off the Power.
Connects to an external eSATA storage device. (EDA450)
Connects to monitors. Each of the outputs only supports
single-screen-division display with sequence function.
Connects up to 32 cameras to the Video In connectors.
This port is currently reserved. Connects to the RS-232 device. Please
refer to 2.3.5 RS-232 Port.
Connects to the RS-485 device, such as EverFocus' EKB-500 keyboard.
Please refer to 2.3.4 RS-485 Port.
Connects to the Main monitor using a HDMI cable. Please refer to 2.3.1
Monitor Connection.
Connects to the Main monitor using a VGA cable. Please refer to 2.3.1
Monitor Connection.
Connects to the Call monitor using a BNC cable. Please refer to 2.3.1
Monitor Connection.
Connects to the Network. Please refer to 2.5 Connecting the DVR to the
Network.
Connects up to 16 alarm inputs. Please refer to 2.3.3 Alarm IO.
Connects to 2 audio output devices, such as speakers. Note that the
speaker with a (built-in) amplifier and external power supply are required.
Connects to 4 alarm output device. Please refer to 2.3.3 Alarm IO.
Connects to 16 audio input devices using the supplied Audio Cable. Note
that the microphone with a (built-in) amplifier and external power supply
is required.
5
11
10
9
PARAGON960 x4 32CH
12 13 14
15