Table of Contents
Advertisement
6.6.3
Matrix
You can configure up to 32 steps of the sequencing order for the Matrix monitors.
Matrix: Select the matrix number to setup sequence.
Sequence: Select "On" to enable sequence function on the selected matrix monitor. Select
"Off" to disable sequence function on the selected matrix monitor.
Camera: If sequence function is disabled, select which camera to be appeared on the matrix
monitor.
Step: Sequence order.
Camera: Select which camera appears in the current step.
Dwell (sec): Set the dwell time for each step. Sequence dwell time can be set from 0 to 99
seconds.
Sequence repeats continuously from steps 1 through 32 until interrupted.
Figure 6-30
99
PARAGON960 x4 32CH
Advertisement
Table of Contents
