Table of Contents
Advertisement
6.6 Display Setting
You can configure the settings for displaying the camera / DVR information on the live view
image. You can also set up the sequencing order for the Main / Call monitor.
6.6.1
Monitor OSD
Check the boxes under the Main Monitor / Call Monitor fields will display the selected items
on the live view image.
Main Monitor / Call Monitor
Title: Check the box to display camera titles.
Date/Time: Check the box to display current date/time.
Event Status: Check the box to display event status.
HDD Status: Check the box to display hard drive status.
Playback Date/Time: Check the box to display playback date/time (only for main monitor).
Playback Status: Check the box to display playback status (only for main monitor).
Text Insert: Check the box to display text inserted.
Screen Mode: Select the suitable screen mode. Selections are: 1920x1080; 1280x1024;
1024x768; 800x600; 720x480. Please see to 2.3.2 Display Aspect Ratio for more details.
Changing the Screen Mode will reboot the DVR.
Note: Resolution selected higher than the monitor can support may cause the screen to black
out after rebooting the DVR.
Figure 6-28
97
PARAGON960 x4 32CH
Advertisement
Table of Contents
