Hot-swap DVR:
You can optionally install three 3.5" HDDs inside the DVR for recording videos. The DVR supports
two hot-swap SATA HDDs and one fixed internal SATA HDD.
1. Make sure the DVR is power-off.
2. If you want to use three HDDs, you have to open the hosing of the NVR. If you want to use
two HDDs only, please see step 5 ~ 8 and 15 for installing instructions.
3. Unscrew the two housing screws on the back panel of the DVR.
4. Push the housing to the back and open it.
5. Open the cover by pushing it.
Figure 2-11
Figure 2-12
Cover
Figure 2-13
13
PARAGON960 x4 32CH