Editing A Caller's Telephone Number Before Calling Back; Erasing Caller Information - Panasonic KX-FC231NZ Operating Instructions Manual

4. Telephone
To stop viewing
Press {STOP} after step 2.
4.7 Editing a caller's
telephone number before
calling back
L Keep the front cover page open for button
locations.
Note:
L Telstra, Optus, Telecom New Zealand and
TelstraClear do not currently send caller
name information.
The caller's telephone number, which is sent to
your telephone from your local telephone
exchange, includes "0" and an area code prefix.
For local calls, "0" and the area code prefix can
be omitted (For New Zealand users only).
4.7.1 With the handset
1
Press {j/OK}.
2
Select "Caller List", then press {>}.
3
Press {e} or {v} repeatedly to display the
desired item.
4
To add a number
Press the dial key ({0} to {9}).
L The number you pressed is added to the
top of the current number.
To erase a number
Press {j/OK}, select "Edit and Call",
then press {>}.
Press {<} or {>} to place the cursor on the
number you wish to erase, then press {C/T}.
5
Press {C} or {s}.
4.7.2 With the base unit
1
Press {CALLER ID}.
2
Press {A} or {B} repeatedly to display the
desired item.
3
Press {CALLER ID} repeatedly to display
the telephone number.
4
To insert a number in front of the telephone
number, press the desired dial key ({0} to
{9}).
L You can also initiate the editing mode by
pressing {*}.
5
Press {DIGITAL SP-PHONE} to call back
the edited number.
38
L The unit will start dialling automatically.
L To send a fax, insert the document FACE
DOWN and press {FAX/START}.
To correct a mistake
1. Press {<} or {>} to move the cursor to the
incorrect number.
2. Press {STOP} to delete the number.
3. Enter the correct number.
To delete a number
Press{<} or {>} to move the cursor to the
number you want to delete and press {STOP}.
L To erase all numbers, press and hold
{STOP}.
To insert a number
1. Press {<} or {>} to move the cursor to the
position to the right of where you want to
insert the number.
2. Enter the number.
4.8 Erasing caller
information
L Keep the front cover page open for button
locations.
Note:
L Telstra, Optus, Telecom New Zealand and
TelstraClear do not currently send caller
name information.
4.8.1 With the handset
1
Press {j/OK}.
2
Select "Caller List", then press {>}.
3
Press {e} or {v} repeatedly to display the
desired item, then press {j/OK}.
4
Select "Erase", then press {>}.
L To erase all items, select "Erase All",
then press {>}.
5
Select "Yes", then press {>}.
6
Press {ih}.
4.8.2 With the base unit
To erase all caller information
1. Press {CALLER ID}.
2. Press {ERASE}.
3. Press {SET}.
L To cancel erasing, press {STOP}.