Table of Contents
Advertisement
10. Programmable Features
Base Unit
10 Programmable Features
10.1 Base unit
programming
{SET}
{MENU}
10.1.1 Programming basic
features
1
Press {MENU}.
2
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L The current setting of the feature will be
displayed.
3
Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
4
Press {SET}.
L The setting you selected is set, and the
next feature will be displayed.
5
To exit programming, press {MENU}.
10.1.2 Programming advanced
features
1
Press {MENU}.
2
Press {<} or {>} repeatedly to display
"ADVANCE SETTINGS".
3
Press {SET}.
4
Select the feature you wish to program.
Press {<} or {>} repeatedly to display the
desired feature.
L The current setting of the feature will be
displayed.
5
Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
66
{<}{>}{A}{B}
6
Press {SET}.
L The setting you selected is set, and the
next feature will be displayed.
7
To exit programming, press {MENU} at any
time.
To program by entering the program code
number directly
You can select a feature by directly entering its
program code (# and a 2-digit number) instead of
using {<} or {>}.
1. Press {MENU}.
2. Press {#} and the 2-digit code (page 67 to
page 70).
3. Press {A} or {B} repeatedly to display the
desired setting.
L This step may be slightly different
depending on the feature.
4. Press {SET}.
5. To exit programming, press {MENU}.
To cancel programming
Press {MENU} to exit.
Advertisement
Table of Contents
