Document Feed Speed [Pick Speed] - Fujitsu fi-7160 Operator's Manual

Chapter 8 Operational Settings

Document Feed Speed [Pick Speed]

When multifeeds and paper jams occur frequently, you may be
able to improve the performance by slowing down the speed
in which documents are picked or fed.
This setting is effective when you scan thin paper.
1
Start up the Software Operation Panel.
For details, refer to "8.1 Starting Up the Software Operation Panel"
(page 143).
2
From the listing on the left, select [Device Setting 2] 
[Pick Speed].
3
Specify the document feed speed.
Normal: Normal document feed speed
Slow: The document feed speed is slower than normal
ATTENTION
The total time for scanning is longer because the document feed
speed slows down.
HINT
This setting can also be configured with the operator panel.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
169