Verification Stamp - Panasonic DX-600 Network Fax Manual

Basic Transmission Settings

Verification Stamp

The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
successfully transmitted page with a small
Press
STAMP
NOTE
88
to:
STAMP = Off
STAMP:
ON
1. When you store a document in memory, the Verification Stamp will stamp on the document if it
is successfully stored in memory. In this case the Verification Stamp is not a confirmation that
the document was successfully transmitted. If you wish to disable the use of the Verification
Stamp when storing document in memory, change the setting of Fax Parameter No. 28. (See
page 79)
2. To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04.
(See page 78)
mark.
STAMP = On
STAMP:
OFF