Verification Stamp - Panasonic Facsimile UF-590 Operating Instructions Manual

Verification Stamp

The Verification Stamp helps you to confirm successful transmissions by stamping the bottom of each
successfully transmitted page with a small
Press to:
STAMP
STAMP:
1. When you store a document in memory, the Verification Stamp will stamp on the document if it
NOTE
is successfully stored in memory. In this case the Verification Stamp is not a confirmation that
the document was successfully transmitted. If you wish to disable the use of the Verification
Stamp when storing document in memory, change the setting of Fax Parameter No. 28. (See
page 37)
2. To change the preset Verification Stamp position, change the setting of Fax Parameter No. 04.
(See page 36)
Basic Transmission Settings
mark.
STAMP = Off
ON
STAMP = On
STAMP:
OFF
43