Panasonic DVCPRO HD AJ-HD1800P Operating Instructions Manual page 98

Setup menus
<VIDEO> (continued)
No./Item Description of setting
1 For selecting the up-conversion picture frame
638*
when SD SDI input signals are supplied.
IN U/C
0000 FIT-V
MODE
Side panel mode
0001 FIT-H
Top and bottom cut in vertical direction
0002 FIT-HV
Stretch mode
*1 For selecting the horizontal frequency band
639
during the up-conversion of SD SDI input
signals.
I U/C RESP H
0000 STD
0001 NARROW
*1 For selecting the vertical frequency band
640
during the up-conversion of SD SDI input
signals.
I U/C RESP V
0000 STD
0001 NARROW
*1 For accentuating the horizontal contours
641
during up-conversion of SD SDI input signals.
I U/C ENH
0000 0dB
H
0001 +0.7dB
0002 +1dB
0003 +1.2dB
<Note>
The numbers on the superimposed display are
approximations only.
*1 For accentuating the vertical contours during
642
up-conversion of SD SDI input signals.
I U/C ENH
0000 0dB
V
0001 +0.7dB
0002 +1dB
0003 +1.2dB
<Note>
The numbers on the superimposed display are
approximations only.
For selecting the input method for line 20 and
*2
643
line 21 of the video signal while the SD signal is
input
IN BLK
LINE
0000 OFF
Not blank
0001 ON
Blank
650 0000 CMPNT*
Level adjustment mode for the component style
0001 CMPST
STYLE
Level adjustment mode for the composite style
The asterisk denotes the factory setting for
*
AJ-HD1800E.
*3 For selecting the rotational axis of the chroma
651
phase adjustment.
HUE STYLE
0000 Pb-Pr
*DW
(SD)
The axis rotates in a perfect circle on the SDI
(component style) vectorscope.
0001 U-V
The axis rotates in a perfect circle on the analog
(composite style) vectorscope.
98
(continued)
0004 +1.5dB
0005 +2dB
0004 +1.5dB
0005 +2dB
No./Item Description of setting
653
For adjusting the Y level of the HD SDI output.
(j ∞ to 0 dB to i3 dB)
*UP
Y LVL (HD)
0000 0.0%
: :
1000 100.0%
: :
1413 141.3%
<Note>
This setting takes effect when "CMPNT" has been
selected as the setup menu item No.650 setting.
654
For adjusting the PB level of the HD SDI output.
(j ∞ to 0 dB to i3 dB)
Pb LVL
*UP
(HD)
0000 0.0%
: :
1000 100.0%
: :
1413 141.3%
<Note>
This setting takes effect when "CMPNT" has been
selected as the setup menu item No.650 setting.
655 For adjusting the PB level of the HD SDI output.
(j ∞ to 0 dB to i3 dB)
*UP
Pr LVL (HD)
0000 0.0%
: :
1000 100.0%
: :
1413 141.3%
<Note>
This setting takes effect when "CMPNT" has been
selected as the setup menu item No.650 setting.
*1 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz
(HD, SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
*2 When the 23/24 Hz mode, 25 Hz (HD, SD) mode, 50 Hz (HD,
SD) mode or 50 Hz mode is selected in System Menu No. 25
(SYSTEM FREQ), this item is not displayed.
*3 When the 50 Hz mode, 25 Hz (HD, SD) mode, or 50 Hz (HD,
SD) mode is selected in System Menu No. 25 (SYSTEM
FREQ), this item is not displayed.
*UP: With HD output (HD tape playback or up-converted output)
*DW: With SD output (SD tape playback or down-converted output)
The underlining (__) denotes the factory setting mode.