Pf1/Pf2 - Panasonic DVCPRO HD AJ-HD1800P Operating Instructions Manual

Function menus
<PF1/PF2>
Up to 24 frequently used setup menu items can be
registered. The items are registered on the function
menus shown below. (No settings have been registered
before the VTR leaves the factory.)
To display one of the function menus, press
(PF1 BK), (PF2 FT) or
F2 F3
down the F button on the <MENU SHIFT> screen.
Selection marker
Registered menu number
Menu name
SHIFT F1 F2
Item selection cursor
Item number
Item number
Registration
1
Selecting the function buttons
Turn the ADJ dial to move the selection marker, and
select one of the function buttons
the menu items are to be registered.
2
Entering the function button
Press the ADJ dial.
The display of the function button entered is highlighted.
3
Selecting menu items
Turn the ADJ dial, and select the menu item for the
function button which was selected in step
4
Entering the menu items.
Press the ADJ dial.
The target of the ADJ dial operation returns to the front
panel. Whatever was selected in step
displayed for the registered menu number and name.
5
To select a menu item for another function button,
1 4
repeat steps to above.
66
(continued)
(PF1 FT),
F1
(PF2 BK) while holding
F4
F3 F4 F5 F6
Category
Setting
number
Setting
Item name
to into which
F1 F6
1
above.
3
above is
6
Saving the settings in a PF registration file
To save what has been set in the function buttons in a PF
registration file, press
F5
If (EXIT) is pressed without the settings having been
F6
saved, the settings will be canceled.
When menu items are registered, they can be called
simply by pressing the PF1 or PF2 direct menu button.
When is pressed :
PF1
<PF1 FT>
When is pressed after pressing
PF1
<PF1 BK>
When is pressed :
PF2
<PF2 FT>
When is pressed after pressing
PF2
<PF2 BK>
Clearing the menu items
1
Turn the ADJ dial to move the selection marker, and
select one of the function buttons
items are to be cleared.
2
Press (RESET). The registered menu number and
F4
name displays will now go blank.
To clear the menu items from other function buttons,
repeat steps 1 and 2 above.
3
To save what has been set in the function buttons in a
PF registration file, press
4
If (EXIT) is pressed without the settings having
F6
been saved, the above settings will be canceled.
Clearing all the function button settings
Press (RESET) while holding down the
F4
the registered menu number and name displays will now go
blank.
All the contents of the PF registration file are cleared. (They
cannot be restored.)
(SET).
:
SHIFT
:
SHIFT
to whose menu
F1 F6
(SET).
F5
button. All
F