Panasonic DVCPRO HD AJ-HD1800P Operating Instructions Manual page 72

Function menus
<CARD> (continued)
[MENU/ERROR LOG/MULTI CUE]
SD Memory
card data Lock
arrangement
SETUP 1
MENU
2
3
4
Yes
←→
5
6
7
8
50 PIN 1
ASSIGN
2
3
4
Yes
←→
5
6
7
8
SYSTEM 1
MENU
2
3
4
Yes
←→
5
6
7
8
SD Memory
card data Lock
arrangement
MULTI CUE 1
2
3
4
Yes ←→ MULTI CUE
5
6
7
8
ERROR LOG 1
2
3
4
Yes ←→ ERROR LOG
5
6
7
8
The SD memory card is capable of storing and retrieving
the settings from the SETUP MENU (Current, USER1 to
USER4)/SYSTEM MENU, the registered contents of
50PIN ASSIGN, the registered points of MULTI CUE, and
the contents of the ERROR LOG.
Titles can be provided for all the data files, and when the
files are saved or loaded, the titles are also copied at the
same time.
The file lock prevents the files on an SD memory card from
being overwritten.
72
(continued)
VTR memory data layout Lock
Current
SETUP MENU
USER1
(what has been
USER2
registered for the
USER3
PF1, PF2 menu
USER4
items, contents of
some function but-
tons)
Current
50 PIN
ASSIGN
Current
SYSTEM
MENU
VTR memory data layout Lock
Current
Current
Settings
1
Selecting the targeted memory
Press the
SHIFT
Targets shift alternately between the SD memory card
No
and VTR MEMORY.
Yes
Yes 2
Selecting the operation files inside the selected
Yes
memory
Yes
The number of the currently selected file is highlighted.
Turn the ADJ dial to select the file to be operated.
For SYSTEM MENU, SETUP MENU and 50PIN
ASSIGN
Yes
The registration status indication for the SD memory
card shifts automatically by selecting either S
(SYSTEM MENU), C1234 (SETUP MENU), or P
(50PIN ASSIGN) for VTR MEMORY.
3
Transferring files between memories
From VTR MEMORY to the SD memory card
Yes
First select the operation file, and then press
(SAVE).
From the SD memory card to VTR MEMORY
After selecting the operation file, press
<Notes>
The title is also transferred at the same time.
After transferring files to the VTR MEMORY side, the
storage process for files requires about 5 seconds.
To turn off the power after transferring files, wait
about 5 seconds or more after transferring the files
and then turn off the power.
No
4
Editing the title of a selected file
First select the operation file, and then press the ADJ
dial.
The first digit of the title display area is highlighted,
indicating that the file title can now be edited.
To input a number, press the number keys.
No
To input letters, tap the numbers keys until the letter
to be input appears while holding down the
button.
More than one letter is allocated to each number key.
Press the ADJ dial to move from one digit to the next
on the title display area.
To enter the title, press the ADJ dial again.
<Notes>
When the display screen has been switched or the
button has been pressed during title editing, the
C
editing enable status is canceled, and the setting
becomes invalid.
A space can be input by pressing the
button.
3
button
F3
F
F2
(LOAD).
F
button and