Check, Change Or Delete A Programme - Panasonic DMR-EZ47V Operating Instructions Manual

Check, change or delete a programme

≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
Icons
F
Timer recording standby is activated.
[ This programme is currently recording.
W The times overlap those in another programme.
Recording of the programme with the later start time
starts when the earlier programme finishes recording.
You stopped a weekly or daily timer recording. The
icon disappears the next time the timer programme
starts recording.
F The disc was full so the programme failed to record.
The programme was copy-protected so it was not
recorded. [DVD]
X
The programme did not complete recording because
the disc or video cassette is dirty or some other
reason.
Drive: Recording drive is set to DVD or VHS.
Timer
Remain DVD
Recording
VHS
No. Name Date Start
New Timer Programme
Press OK to store new programme.
OK
RETURN
Message displayed in the "Drive space" line
OK: Displayed if the recording can fit in the remaining
space. [DVD]
> (Date): For recordings made daily or weekly, the display
will show until when recordings can be made (up
to a maximum of one month from the present
time) based on the time remaining on the disc.
! : It may not be possible to record because:
≥The disc is write-protected. [DVD]
≥There is no more space left. [DVD]
≥The number of possible titles has reached its
maximum. [DVD]
≥The new timer recording will completely or
partially record over this timer recording.
The timer recording was not performed or
completed for the following reasons:
≥A disc or a video cassette was not inserted.
≥A protected disc or a video cassette without a
secure accidental erasure prevention tab was
inserted.
≥The remaining recording time on the video
cassette was insufficient. [VHS]
All other recordable cases. [VHS]
– – :
∫ To change a programme
Press [3, 4] to select the programme and press [OK]. (➡ 29,
step 3)
∫ To delete a programme
Press [3, 4] to select the programme and press [DELETE ¢].
You can also delete a programme with the following steps
1 Press [3, 4] to select the programme and press [OPTION].
2 Press [3, 4] to select "Delete" and press [OK].
∫ To exit the timer recording list
Press [PROG/CHECK].
Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
1:58 SP
--:----
12:56:00 15. 7. TUE
Drive
Mode
Stop Drive space
RQT8858
31