Dv Automatic Recording (Dv Auto Rec) - Panasonic DMR-EZ47V Operating Instructions Manual

DV automatic recording (DV Auto Rec)

[RAM] [-R] [-RW‹V›] [+R] [+RW]
[RAM] When the "DV Auto Rec" function is used, programmes are
recorded as a title while at the same time chapters are created at
each break in the images and the playlist is created automatically.
Preparation
1 Turn off the main unit and DV equipment, then connect the
equipment with the unit's DV input terminal (➡ 54).
2 Turn on the main unit and DV equipment.
3 Press [DRIVE SELECT] to select the DVD drive.
4 Press [REC MODE] to select the recording mode.
5 Pause play of the DV equipment at the point you want recording
to start.
≥When the output signal from the external equipment is NTSC,
change the "TV System" to "NTSC" in the Setup menu (➡ 69).
After preparation is completed, the following screen appears.
DV Auto Rec
DV unit is connected.
Record from the DV unit?
Rec to DVD Cancel
SELECT
RETURN
OK
≥When the screen is not displayed, press [DRIVE SELECT] to select
DVD and then continue from step 1.
1
While stopped
Press [FUNCTION MENU].
2
Press [3, 4] to select "To Others"
and press [OK].
3
Press [3, 4] to select "DV Auto Rec"
and press [OK].
4
Press [2, 1] to select "Rec" and
press [OK].
Recording starts.
When recording finishes
The confirmation screen appears. Press [OK] to finish DV automatic
recording.
To stop recording
Press [∫].
[Note]
≥External DV cannot be recorded to VHS.
≥Only one piece of DV equipment (e.g., digital video camcorder) can
be connected to the unit via the DV input terminal.
≥It is not possible to operate the unit from the connected DV equipment.
≥The DV input on this unit is for use with DV equipment only. (It
cannot be connected to a computer, etc.)
≥The DV equipment name may not be shown correctly.
≥Depending on the DV equipment, the images or audio may not be
input properly.
≥The date and time information on the tape of the DV equipment will
not be recorded.
≥You cannot record and play simultaneously.
If the DV automatic recording function does not work properly,
check the connections and DV equipment settings, and turn the
unit off and back on.
If that does not work, follow the instructions for manual
recording (➡ 54).
Press [2, 1] to select "Rec to
DVD" and press [OK].
You can proceed to step 4.
RQT8858
55