Auto Setup; Selecting Tv Screen Type - Panasonic Diga DMR-E51 Operating Instructions Manual

Connecting and Setting up (continued)

Auto Setup

Auto Setup automatically tunes all available stations.
Press [DVD, Í] (1) to switch the unit on.
1
DMR-E51GCS: Auto-Setup screen appears on the television
and go to step 3.
DMR-E50GN: The Country setting menu appears on the
television.
Country
Australia
New Zealand
Others
SELECT
ENTER
RETURN
RETURN : leave ENTER : access
Use [3, 4, 2, 1] (10) to select the country and
2
press [ENTER] (10).
3
Auto Setup starts.
≥This takes about 5 minutes.
Auto-Setup
128
Auto-Setup in progress, please wait.
RETURN: to abort
RETURN
To cancel Auto Setup before it finishes
Press [RETURN] (23).
The clock setting menu appears after Auto Setup
finishes
(1) Use [3, 4, 2, 1] (10) to set the correct time and date.
(2) Press [ENTER] (10) to conclude the setting.
To confirm that stations have been tuned correctly
See page 56.
When no stations have been set, confirm all
connections and restart Auto Setup
See page 57 and Hint below.
When station names or channel numbers have not
been set correctly
See page 56.
Hint
≥You can restart the Auto Setup if the screen of the unit's tuner is
displayed in the stop mode. Hold down [W, CH] (18) and [X, CH]
(18) on the main unit simultaneously for about 5 seconds.

Selecting TV screen type

The aspect ratio is factory set to 4:3 for a regular television. You do
not have to change this setting if you have a regular 4:3 aspect
television.
Preparation
≥Turn on the television and select the appropriate video input to
suit the connections to this unit.
≥Switch [DVD, TV] (15) to "DVD".
Press [DVD, Í] (1) to turn this unit on.
1
Press [FUNCTIONS] (11) to show the FUNCTIONS
2
window.
Use [3, 4, 2, 1] (10) to select "SETUP" and press
3
[ENTER] (10).
DVD-RAM
Disc Protection
FUNCTIONS
Cartridge Protection Off
DISC INFORMATION DIRECT NAVIGATOR CREATE PLAY LIST
SELECT
TIMER RECORDING
ENTER
RETURN
SETUP
Use [3, 4] (10) to select the "Connection" and
4
press [2] or [1] (10).
Use [3, 4] (10) to select "TV Aspect" and press
5
[ENTER] (10).
SETUP
TV Aspect
Progressive (NTSC)
TV System TV System
Tuning
Normal (4:3) TV
Settings
Norm (4:3) TV Settings (DVD-Video)
Disc
Norm (4:3) TV Settings (DVD-RAM)
Picture
Sound
Display SELECT Tab
Connection
ENTER
Use [3, 4] (10) to select the TV aspect and press
6
[ENTER] (10).
SETUP TV Aspect
Norm (4:3)
Wide (16:9)
Tuning
Settings
Disc
Picture
Sound
SELECT
Display
ENTER
Connection
RETURN
≥4:3 (factory setting)
≥16:9
ªTo return to the previous screen
Press [RETURN] (23).
For your reference
Apart from "TV Aspect", other settings also affect how video
appears on your television. Check the following if video doesn't
appear correctly on your television.
≥"Connection" — "Norm (4:3) TV Settings (DVD-RAM)" or "Norm
(4:3) TV Settings (DVD-Video)" (page 53).
≥The video setting on the disc. How video appears is often
specified by the disc itself.
≥The video settings on your television.
12
Off
PLAY PLAY LIST
TOP PLAY FLEXIBLE REC
RETURN