Timer Recording; Code - Panasonic Diga DMR-E51 Operating Instructions Manual

Using G- number to make timer

CODE

recording
[RAM] [DVD-R]
Remote control only
You can easily programme the unit to make a timer recording of a
programme by entering the programme's G-
can be found in the television sections of newspapers or in
television guides. You can programme up to 16 programmes one
month in advance. Programmes for everyday or every week are
counted as one programme.
Preparation
≥Switch [DVD, TV] (15) to "DVD".
≥Ensure that this unit's clock is set correctly.
≥Insert a disc for recording (make sure there is enough room for
the programme you are going to record plus a little extra).
Press [G-Code] (2) button.
1
G-Code
Remain 0:59 SP
12:53:00 12.7 TUE
Enter G-Code Number by using 0-9 key.
No.
RETURN 0 -- 9
Press the numeric buttons (4) to enter the G-
2
number.
G-Code
Remain 0:59 SP
12:53:00 12.7 TUE
1 1 1 1 1 1 1 1 1
No.
0 -- 9
RETURN
≥If you enter the wrong digit, use [2] (10) to move back and
enter the correct digit.
Press [ENTER] (10).
3
≥The Timer Programme Correction screen which allows you to
confirm the programme appears and make corrections if
necessary.
TIMER
Remain 1:58 SP
RECORDING
12:53:00 12.7 TUE
Name Date Start Stop Mode
64 ABC 12/ 7 TUE 1:00 2:00 SP
Title
Press ENTER to store new programme.
SELECT
CANCEL No.
0 -- 9
ENTER RETURN
≥Check the programme.
To make corrections (page 25).
To programme other recordings, repeat steps 1, 2 and 3.

Timer recording

number, which
CODE
CODE
24
4
If the programme is correct
Press [ENTER] (10).
≥The Timer Programme List screen appears.
TIMER
Remain 1:58 SP
RECORDING
1:19:00 12.7 TUE
Disc
No. Name Date Start Stop Mode
space
01 64 ABC 12/ 7 TUE 1:19 1:22 SP OK
New Timer Programme
SELECT
CANCEL
ENTER RETURN
5 Press [RETURN] (23).
ªTo put the unit on recording standby
, TIMER] (12).
Press [
Ensure " " lights on the unit's display.