Mm900 Declaration Of Conformity - Siemens SCALANCE X308-2M Operating Instructions Manual

Approvals, certificates, standards
9.8 MM900 product group
The SCALANCE MM900 media modules have the following approvals:
NOTICE
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
● EN 60079-15 : 2005
● c-UL-us
● c-UL-us
● c-UL-us for Hazardous Location
Approved for use in
Cl. 1, Div. 2, GP. A, B, C, D, T...
Cl. 1, Zone 2, GP. IIC T...
● FM 3611 Hazardous (Classified) Location Electrical Equipment
● AS/NZS 2064 (Class A)
(T... / T* = For detailed information on the temperature class, refer to the type plate)
9.8.2

MM900 declaration of conformity

Declaration of Conformity
You will find the EC Declaration of Conformity for these products on the Internet at the
following address:
http://support.automation.siemens.com/WW/view/en/33118441
--> Entry list
--> Entry type "Certificates"
--> Certificate type "Declaration of Conformity"
Example German: "EG-Konformitätserklärung SCALANCE X310",
Example English: "Declaration of Conformity SCALANCE X310".
266
EN 60079-0:2006
II 3 G Ex nA II T...
KEMA 07 ATEX 0145X
UL 60950-1 (Information Technology Equipment) CSA C22.2 No. 60950-1
UL 508 (Industrial Control Equipment) CSA C22.2 No. 142-M1987
UL 1604 and UL 2279
or ANSI/ISA 12.12.01
Non Incendive / Class I / Division 2 / Groups A,B,C,D / T*
Non Incendive / Class I / Zone 2 / Group IIC / T*
Operating Instructions, 02/2012, A5E01113043-12
SCALANCE X-300