Specifications - Sharp cd-mpx880 Manual

Specifications

As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Power source
Power consumption Power on: 82 W
Dimensions
Weight
(*) This power consumption
demonstration mode is cancelled in the power stand-by mode.
Refer to page 8 to cancel the demonstration mode.
Amplifier
Output power
Output terminals
Input terminals
Tuner
Frequency range
Downloaded From Disc-Player.com Sharp Manuals
AC 220 - 240 V ~ 50 Hz
Power stand-by: 0.6 W (*)
Width: 260 mm (10 - 1/4" )
Height: 332 mm (13" )
Depth: 324 mm (12 - 7/8")
7.4 kg (16.31 lbs.)
value is obtained
PMPO: 880 W
MPO: 440 W (220 W + 220 W) (10 % T.H.D.)
RMS: 280 W (140 W + 140 W) (10 % T.H.D.)
RMS: 200 W (100 W + 100 W) (1 % T.H.D.)
Front Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Audio In (audio signal):
250 mV/47 k ohms
FM: 87.5 - 108.0 MHz
AM: 522 - 1,620 kHz
CD player
Type
Signal readout
D/A converter
Frequency
response
Dynamic range
Cassette deck
Frequency
response
when the
Signal/noise ratio
Wow and flutter
Speaker
Type
Maximum input
power
Rated input power
Impedance
Dimensions
Weight
5-disc multi-play compact disc player
Non-contact, 3-beam semiconductor laser
pickup
1-bit D/A converter
20 - 20,000 Hz
90 dB (1 kHz)
50 - 14,000 Hz (normal tape)
55 dB (TAPE 1, playback)
50 dB (TAPE 2, recording/playback)
0.35 % (DIN 45 511)
2-way type speaker system
5 cm (2") tweeter
16 cm (6-5/16") woofer
280 W
140 W
6 ohms
Width: 200 mm (7-7/8")
Height: 330 mm (13")
Depth: 220.5 mm (8 - 11/16")
3.18 kg (7.0 lbs.)/each
CD-MPX880H
ENGLISH
E-42