Table of Contents
Advertisement
6. Turn both win-
dow lock knobs,
located at the top
corners of the
storage pocket,
to the locked
position. When
both lock knobs
are in the locked position, the window
is securely stored.
7. Push both latch levers up to the
locked position until each clicks,
indicating they are locked correctly.
Note: See Section 2 of your Owner
Manual for important Midgate
operation warnings.
To install the rear window:
1. Squeeze, pull down and release the
latch levers.
2. Hold the rear glass against the
Midgate with one hand and turn the
glass lock knobs to the unlocked
position.
3. Pull the window out of the storage
pocket using the grab handles.
4. Tilt the glass slightly and guide the
bottom edge into the window frame's
lower channel.
5. Apply some downward pressure on
the window to ensure the bottom
edge is properly seated in the
channel.
6. Use one hand to push the window flat
against the window frame seal and
hold it in place. Use your other hand
to press each latch lever up until it
clicks, indicating it is locked in place.
See Section 2 of your Owner Manual.
21
Advertisement
Table of Contents
