Panasonic DMR-ES25 Operating Instructions Manual page 12

STEP 1 Connection
Connecting an amplifier or system component
n Connecting an amplifier with a digital input
terminal
• When connecting this unit to a television
with an HDMI cable, set "HDMI Audio
Output" to "Off" in the Setup menu
(Ô page 45).
• To enjoy multi-channel surround on a
DVD-Video, connect an amplifier with a
built-in decoder displaying these logo
marks using an optical digital audio cable
and change the settings in Digital Audio
Output (Ô page 44).
• Before purchasing an optical digital audio
cable, check the terminal shape of the
equipment to be connected.
• You cannot use DTS Digital Surround
decoders not suited to DVD.
• Even if using this connection method, output will be in only
2 channels when playing DVD-Audio.
Optical digital audio cable
Do not bend sharply when
connecting.
Insert fully, with this side facing up.
RQT8327
12
Amplifier's rear panel
OPTICAL IN
This unit's rear panel
n Connection to a stereo amplifier
Amplifier's rear panel
AUDIO IN
R L
Red White
Audio cable
Red White
This unit's rear panel