HP ENVY Maintenance And Service Manual page 54

a. Remove the four Phillips PM2.0×2.9 screws (1) that secure the display panel to the
display enclosure.
b. Lift the display panel (2) straight up and remove it from the display enclosure.
The display panel is available using spare part numbers 812538-001 (FHD, SVA, non-touch panel),
829329-001 (FHD, UWVA, non-touch panel), or 812537-001 (HD, non-touch panel).
13. If it is necessary to replace the display panel cable:
CAUTION:
screws, and any other foreign objects. Failure to follow this caution can result in damage to the display
panel.
a. Turn the display panel upside down with the bottom edge toward you.
46 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Before turning the display panel upside down, make sure the work surface is clear of tools,