Edimax BR-6478 AC V2 User Manual page 61

Host Name
MAC Address
Static IP Address
Subnet Mask
Default Gateway
Address
MAC Address
DNS Address
DNS Address 1,2 & 3 Enter the DNS address(es) assigned by your ISP
DNS Proxy
DNS Proxy Rules
(URL)
Enable Dual-WAN
Access
User ID
Password
PPTP Gateway
Connection ID
MTU
BEZEQ-ISRAEL
Connection Type
Enter the host name of your computer here If
required.
For some applications, you may need to designate a
specific MAC address for the router. Please enter
the MAC address here. If you are connecting the
router to a computer, press "Clone Mac" to
automatically enter your computer's MAC address.
Input the IP address assigned by your ISP here.
Input the subnet mask assigned by your ISP here.
Input the default gateway assigned by your ISP
here. Some ISPs may call this "Default Route".
If your ISP filters access by MAC addresses, enter
your computer's MAC address here. Click "Clone
MAC" to automatically enter your computer's MAC
address.
Select "Obtain an IP address automatically" or "Use
the following IP address". Check with your ISP if you
are unsure.
here.
Enable or disable a DNS proxy server.
When DNS proxy is enabled, enter the URL of a DNS
proxy server.
Enable/disable dual WAN access. When you enable
dual WAN access, select an IGMP source.
Input the user name assigned by your ISP here.
Input the password assigned by your ISP here.
Input the PPTP gateway assigned by your ISP here.
Specify a reference name/ID for the connection.
Enter the maximum transmission unit (MTU) value
of your network connection. The default value is
1392.
Check the "Enable" box if you are using BEZEQ
network services (Israel users only).
Specify a connection type:
1. "Continuous": Connected all the time.
2. "Connect on Demand": Connect when you
initiate an Internet connection.
3. "Manual": Connect/disconnect manually using
57