Edimax BR-6478 AC V2 User Manual page 59

DNS Address
DNS Address 1, 2 &
3
TTL
Service Name
MTU
Connection Type
Idle Time Out
Enable Dual-WAN
Access
your computer's MAC address.
Select "Obtain an IP address automatically" or
"Use the following IP address". Check with
your ISP if you are unsure.
Enter the DNS address(es) assigned by your
ISP here.
Enable or disable TTL.
Give this Internet service a name (optional).
Enter the maximum transmission unit (MTU)
value of your network connection. The
default value is 1392.
Specify a connection type:
1. "Continuous": Connected all the time.
2. "Connect on Demand": Connect when you
initiate an Internet connection.
3. "Manual": Connect/disconnect manually
using the "Connect" and "Disconnect"
buttons.
Specify the amount of time the router waits
before shutting down an idle connection.
Only available when "Connect on Demand"
(above) is selected.
Enable/disable dual WAN access. When you
enable dual WAN access, select an IGMP
source and enter a "Host Name" and "MAC
Address".
55