Edimax BR-6478 AC V2 User Manual page 104

Local Port Range
Remote IP Address
Remote Port Range
Traffic Type
Protocol
Save
QoS rule entries will be listed in the "Current QoS Table" as shown below.
Select a rule using the "Select" checkbox.
When using the "Edit" button only one rule can be selected each
time.
QoS rules will be processed in the order that they are listed i.e.
the rule at the top of the list will be applied first, and then the
second rule etc. The order can be adjusted using the "Move
Up/Down" buttons.
Edit
Delete Selected/
Delete All
Move Up/Down
Enter the port range to activate the QoS rule.
Enter a single port number e.g. 110 or a
range of port numbers e.g. 110-120
Enter the remote IP address range which will
activate the QoS rule.
Enter a starting IP address in the left field
and the end IP address in the right field to
define a range of IP addresses; or enter an IP
address in the left field only to define a single
IP address.
Enter the remote port range to activate the
QoS rule.
Enter a single port number e.g. 110 or a
range of port numbers e.g. 110-120
Select traffic type as an alternative to
specifying a port range above.
Select a "TCP" or "UDP" protocol type.
Click 'add' button to add a new QoS rule
(detailed instructions will be given below).
Edit a selected rule.
Delete selected or all entries from the
table.
Move selected rule up or down the list.
100