Edimax BR-6478 AC V2 User Manual page 167

Username/Password This is the default username and password to
Wi-Fi Network
Name
MAC
PIN CODE
7. I forgot my password.
a. Reset the router to its factory default settings and use the default username
admin and default password 1234. Default settings are displayed on the product
label on the back of the device, as shown above.
8. Do the blue WAN port and yellow LAN ports work the same when
the device is in different modes?
No, the WAN and LAN ports have slightly different functions depending on the
operating mode of the device.
a. In Wi-Fi router mode, the WAN port is for a direct connection to your xDSL
modem. The LAN ports are for wired network clients.
b. In access point mode, the WAN port is not functional. Connect your existing
router to the device's LAN port, and the other LAN ports can connect wired
network clients.
c. In Wi-Fi extender, Wi-Fi bridge & WISP mode, the WAN port is not functional
and the LAN ports are for wired network clients. Do not connect your existing
router to the device's WAN or LAN ports, as this can cause the device to
malfunction.
connected to the device by Wi-Fi or Ethernet
cable.
access the browser based configuration interface
when you go to the "Router Login" URL (above).
This is the default Wi-Fi network name for the
device. Search for this name (SSID) and connect to
it in order to access the "Router Login" URL
(above).
A MAC address is unique to every device and is
used for identification within a network. Your
device's unique MAC addresses are displayed
here.
This is your device's PIN code for Wi-Fi Protected
Setup (WPS) for each wireless frequency.
163