Repository Configuration; Total Utilization; Replication Information; Repository Information - IBM TS7650G User Manual

Note: You can open the Storage resources dialog at any time by clicking the View
resources button on the toolbar.

Repository configuration

The Repository configuration pane features the following information:

Total utilization

The Total utilization pane displays the following information in both graphical
and numeric format:

Replication information

The Replication information pane displays the replication properties of the
ProtecTIERsystem:
v ProtecTIER Replication Manager information:
v Grid information:
128
IBM TS7650G Deduplication Gateway for ProtecTIER
Table 35. Repository information
Field
Configured size (in TB)
Configured factoring ratio
Configured peak throughput
(in MB/Sec)
Configured license capacity
Table 36. Total utilization information
Column name
Used space
Nominal data size
Deduplication ratio
Storage saving
Field
Management address
Replication address
Description
The physical repository size, in terabytes, that was specified
when the repository was created.
The estimated HyperFactor factoring ratio that was
specified when the repository was created.
The expected maximum peak throughput that was specified
when the repository was created.
The physical capacity of the repository, in terabytes, that is
specified by the user license. (The unit is shown in TB as a
decimal format, which means it is a multiple of 1000,
instead of a multiple of 1024.)
Definition
The amount of disk space currently containing physical
data.
The amount of nominal data used for backup and
replication.
The ratio of the nominal data size/used space.
The percentage of the data saved derived from the
deduplication ratio.
Storage savings = (1-1/deduplication ratio) x 100.
Definition
The external IP address of the ProtecTIER
Replication Manager used by ProtecTIER
Manager to connect to the Replication
Manager.
The replication IP address of the
ProtecTIER Replication Manager.
®
: User's Guide for FSI Systems