IBM TS7650G User Manual page 64

1. Log in to Server A. Open a Secured Shell (SSH) session to the node and log in
2. At the command line type menu and then press Enter. The ProtecTIER Service
3. Type the numeral corresponding to ProtecTIER Configuration and press Enter.
4. Type the numeral corresponding to File Systems Management and press Enter.
44
IBM TS7650G Deduplication Gateway for ProtecTIER
using the user ID: ptconfig and password: ptconfig.
menu displays:
----------------------------------------------------------------------
ProtecTIER Service Menu running on rasddx
----------------------------------------------------------------------
1) ProtecTIER Configuration (...)
2) Manage ProtecTIER services (...)
3) Health Monitoring (...)
4) Problem Alerting (...)
5) Version Information (...)
6) Generate a service report
7) Generate a system view
8) Update ProtecTIER code
9) ProtecTIER analysis (...)
E) Exit
----------------------------------------------------------------------
>>> Your choice?
The ProtecTIER Configuration menu displays:
----------------------------------------------------------------------
ProtecTIER Service Menu running on rasddx
ProtecTIER Configuration (...)
----------------------------------------------------------------------
1) Configure ProtecTIER node
2) Recover Configuration for a replaced server
3) Configure machine serial number for a replaced server
4) Configure RAS
5) Update Time, Date, Timezone & Timeserver(s)
6) Scan storage interconnections
7) File Systems Management (...)
8) Configure replication (...)
9) IP Network configuration (...)
10) Update Firmware (...)
11) Update the system's name
12) Validate configuration
13) Single Node - code upgrade
14) OS images Management (...)
15) Replace SAS drive
B) Back
E) Exit
----------------------------------------------------------------------
>>> Your choice?
The File Systems Management menu displays.
®
: User's Guide for FSI Systems