Server Options; Commands; Processing Options - IBM TS7650G User Manual

Table 3. Processing options (continued)

Processing options

[-p (--createprofile) FILE]

Server options

This topic describes the server options to use when querying the ProtecTIER server
through the command line interface (CLI). Server options are used for connection
to the management server. They should appear with each query/action - except for
the arguments -h or -v.
Usage
Note: Administrator privileges are required for configuration operations.
You can specify the following server options at the beginning of the command
string:
Table 4. Server options

Server options

--ip <IP>
[--port <PORT>]
[--loginFile <FILE>]
[--loginInline <USERNAME,PASSWORD>]
[--force]

Commands

The following tables contain lists of commands to invoke on the management
server.
For information about ProtecTIER Repository commands, see "ProtecTIER
repository commands" on page 55.
54
IBM TS7650G Deduplication Gateway for ProtecTIER
Creates or modifies the user profile file. This file is used
for logging into the management server.
Specify the IP address of the management server.
This field is required if you are running ptcli from a
server or PC that is not the ProtecTIER server to which
you want to connect.
Specify the port of the management server. The default
is: 3501.
Note: This is optional.
Specify a user profile file for login.
Notes:
v This is optional.
v When specifying --loginFile, using --loginInline is
mutually exclusive.
Specify a login using the user name and password.
Notes:
v This is optional.
v When specifying --loginInline, using --loginFile is
mutually exclusive.
Force the login if another administrator is already logged
in.
Note: This is optional.
®
: User's Guide for FSI Systems
Explanation
Explanation