Viewing The Alerts And Events Log Windows; Wizard Error Messages; Alerts Log - IBM TS7650G User Manual

3. Click Yes. The trace buffer is reset for the designated node and new

Viewing the alerts and events log windows

This topic describes how to view alerts and events in the ProtecTIER system logs
using the ProtecTIER Manager application.
About this task
If an error occurs, the Alerts button on the bottom-right of the View pane turns red
and features a blinking exclamation mark.
Click Software Alerts to view the list of error events in the Alerts Log dialog.
Figure 46. Alerts log
The Alerts Log and Events Log dialogs only display information for one node at a
time. In addition, the Alerts Log and Events Log dialogs only display up to 200
alert events at one time. Navigate to a previous set of 200 alert events by clicking
Previous lines. Navigate to a later set of 200 alert events by clicking Next lines.
Note: View the error log directly on a ProtecTIER server by opening the
/pt_work/log/vtf_error.log file. View the alerts log by opening the
/pt_work/log/vtf_event.log file.

Wizard error messages

ProtecTIER Manager wizards feature a Message area to inform you of issues that
relate to each wizard screen.
172
IBM TS7650G Deduplication Gateway for ProtecTIER
information begins to be gathered for that node.
®
: User's Guide for FSI Systems