Removing And Installing The Device Fan - Siemens SIMATIC IPC677D Operating Instructions Manual

7.7.7

Removing and installing the device fan

Requirement
● The device is opened.
Procedure
Removal
1.
2.
3.
4.
Installation
Note
Install only a fan of the same type. Note the correct fan mounting position: Make sure that
the blades of the fan are on the outside of the housing.
Proceed in reverse order.
SIMATIC IPC677D
Operating Instructions, 09/2014, A5E32995420-AC
Remove the two screws
remove the air guide pulling it
up vertically.
Loosen the four plastic rivets
on the enclosure.
③
Pull out the fan plug
④
Take the fan out of the en-
closure.
①
and
②
.
Maintaining and servicing your device
7.7 Removing and installing hardware
99