Dimensional Drawing For The Installation Of Expansion Modules; Technical Specifications; General Technical Specifications - Siemens SIMATIC IPC677D Operating Instructions Manual

8.3.7

Dimensional drawing for the installation of expansion modules

Short PCI or PCIe expansion card
8.4

Technical specifications

8.4.1

General technical specifications

Order numbers
Weight
Supply voltage AC
Supply voltage DC
Input current AC
Input current DC
Line voltage frequency
Short-term voltage interruption in
accordance with Namur
Power consumption
Degree of protection
Protection class
Safety specifications
Noise emission
Quality assurance
The device should only be connected to a 24 V DC power supply which meets the re-
1
quirements of safe extra low voltage (SELV) according to IEC/EN/DIN EN 60950-1. A
protective conductor must also be used (see section "Connecting the 24 VDC power sup-
ply (Page 41)").
SIMATIC IPC677D
Operating Instructions, 09/2014, A5E32995420-AC
See order documents
15"
12 kg
Nominal 100-240 V AC (-15% / +10%) (autorange)
Nominal 24 V DC (-20% / + 20%), SELV
1
Continuous current up to 1.7 A (up to 50 A for 1 ms at startup)
Continuous current up to 7.1 A (up to 14 A for 30 ms at
startup)
50-60 Hz (47 to 63 Hz)
max. 20 ms (at 93 to 264 V)
(max. 10 events per hour; recovery time at least 1 s)
AC: 190 W
•
DC: 210 W
•
IP 20 to IEC 60529
Protection class I to IEC 61140
EN 60950-1; UL508; CSA C22.2 No 142
< 55 dB(A) according to EN ISO 7779
In accordance with ISO 9001
Technical information
8.4 Technical specifications
19" 22"
14 kg 16 kg
1
121